Arma Kontrol High-Security / K – 12 Rising Bollard is a security product specifically designed for risks of any kind of assassination with a vehicle.
Produced specifically for areas with high levels of security, its operation system, impact resistance and use are completely different from other standard products.
License Plate Recognition (Automatic Access System—AAS), Card Readers, etc. can be integrated into the system.
Besides being a producer, Arma Kontrol also provides special solutions to its customers, conducting a risk analysis of the area with its security staff and engineers.
|Diameter||Ø 273 - 300 - 323 mm|
|Length||900 - 1100 mm|
|Wall Thickness||30 - 50 - 70 mm|
|Moving Part||Powder Coating /304-316 Stainless|
|Mortise and Tenon Joinery||Hot-dip Galvanized|
|Connection Points||M8 x 30 İmbus Bolt (Stainless)|
|Collision Energy||1902.66 Kj|
|Operating Speed||7-9 sec.|
|Control Panel||A-GA Board|
|System Security Support||Loop Sensor|
|Min. Operating Pressure||60 bar /870 psi|
|Max. Operating Pressure||100 bar /1450 psi|
|Hydraulic Hose||R2 1/2 330 Bar|
|Unit Operating Voltage||220/380 V ( AC)|
|Operating Temperature||-25 °C / +50 °C|
|Manual Lifting||Hand Pump|
|Can be connected to any kind of Access control system||License Plate Recognition, Card Reader,etc|
|Power Outage||Accumulator Support|
|Warning Equipment||Flasher / Traffic Lamp|
|E.F.O. Circuit For Emergency Lifting||Yes 2 sec.|
|Control Panel||PLC (Programmable Logic Controller)|
|System Security Support||Safety Photocell|
|Hydraulic System Heating- Cooling|
|Water Drain Pump|